SYSTEM TEST
1. Press the key until SYSTEM STATUS? is
displayed.
2. When SYSTEM STATUS? is displayed press any one of
the top four
select keys. The display will list each system monitor and status
one at a time.
Example: AC POWER - OKAY
Monitors Status
A.C. POWER = A.C. power -OKAY= Normal
BATTERY = Battery power -TRBL =
Trouble
TAMPER = Panel box tamper
User Code Level: 4
Function: Automatically tests various parts of your alarm system.
System Test is used to test the battery, alarm bell or siren, and
communication to a central station. When selected you will be asked
to enter your code number. When the code number is accepted the
system test begins automatically.
A test of the alarm system should be made at least once a week.
Step By Step:
1. Press the key until SYSTEM TEST? is
displayed.
2. When SYSTEM TEST? is displayed press any one
of the top four
select keys. The display will read ENTER CODE: - .
COMMAND
COMMAND
30
22
TIME
User Code Level: None for time display
8 to reset time
Function: Displays day, time and date.
Time is used to display the current day of the week, the time of day
and date of year. The day, time or date can also be reset. When time
is selected the day of week and time of day are displayed, followed
by the date and year. If no changes are to be made do nothing and
the display will clear automatically. If the day , time or date is to be
changed press COMMAND while the date is being displayed. You
will be asked to enter your code number. When the code number is
accepted you can choose which of the three you wish to change and
enter the new information.
Step By Step:
1. Press until TIME? is displayed.
2. When TIME? is displayed press any one of
the top
four select keys. The display will show the current day and time.
Press and the current date will be displayed.
3. To reset the day, time or date press while
the current
COMMAND
COMMAND
COMMAND
COMMAND
date is being displayed. The display will read ENTER CODE:
- .
4. Enter your code number and press . The display will read
TIME DAY DATE .
TIME
5. Press to reset the time of day, then go to step 6.
DAY
Press to reset the day of week, then go to step 7.
DATE
Press to reset the date and year, then go to step 8.
6. If TIME is pressed in step 5, the display will read - : AM
PM
AM PM
Enter the new time and then press the or
key. (Note: a zero must be entered for the
tens digit of the hour if the hour is less than 10.)
After time is entered the display will return to step 5.
7. If DAY is pressed in step 5, the display will read:
SUN MON TUE WED then THU FRI SAT
Press the key below the desired day when it is
displayed.
The display will return to step 5.
8. If DATE is pressed in step 5, the display will read:
MONTH:- Enter up to two digits for the month, then
DAY:- Enter up to two digits for the day, then
YEAR:- Enter up to two digits for the year.
The display will return to the time of day display.
.
(55 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels