DMP Electronics XTL Series Guide de l'utilisateur Page 29

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 58
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 28
User Menu XTL Series User Guide 25
REMOVE Devices from FAVORITES
1. Access the User Menu.
2. Press COMMAND until ZWAVE SETUP? displays.
3. Press any Select key. The keypad displaysADD LIST REMOVE.
4. Press COMMAND again to display FAV XFER REDISC. Select
FAV and FAVORITE NUMBER: - is displayed.
5. Enter a Favorite number between 1 and 20, press COMMAND.
6. The Favorite number and name displays. Press COMMAND
and the Favorite Name and ADD EDIT REMOVE displays.
7. Select REMOVE and the rst Z-Wave device stored in the
Favorite displays.
Remaining devices can be viewed by
pressing the COMMAND key.
8. Press any Select key to remove the device from the Favorite.
REMOVE DEVICE FROM FAV? NO YES displays. When YES is
selected, the device is removed from the Favorite.
Transfer Controller (XFER)
This option allows the transfer of all existing Z-Wave devices that
are currently programmed in another manufacturer’s Z-Wave
portable controller to your system.
This operation will overwrite all Z-Wave devices that are
programmed in your system. This option typically occurs at
the time your DMP Z-Wave controller is installed.
Initiate the transfer at the other manufacturer’s Z-Wave portable
controller after starting the transfer on the DMP keypad. Z-Wave
devices are NOT overwritten until the transfer has been initiated at
the other manufacturer’s Z-Wave portable controller. The transfer
should not be stopped once the process has been initiated from the
other manufacturer’s Z-Wave portable controller.
Transfer Operation:
1. Access the User Menu.
2. Press COMMAND until ZWAVE SETUP? displays.
3. Press any Select key. The keypad displays
ADD LIST REMOVE.
4. Press COMMAND again to display FAV XFER REDISC. Select
XFER. The keypad displays XFER WILL DELETE EXISTING
DEVICES then displays XFER CNTRL SURE? YES NO.
5. Select YES to to allow receipt of Z-Wave devices to your
system. The keypad displays TRANSFERRING Z-WAVE
DEVICES. Pressing the Back Arrow key cancels the transfer.
Select NO to exit the XFER menu and return to ZWAVE
SETUP?. All programming will still be intact on the DMP
Z-Wave controller and will cancel the transfer.
Vue de la page 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

Hama Combat Bow V2 manuali

Manuali dei proprietari e guide per l'utente per Game pad Hama Combat Bow V2.
We fornisce 3 manuali pdf Hama Combat Bow V2 per scaricare gratuitamente in base al tipo di documento: Manuale Utente


Hama Combat Bow V2 Manuale Utente (16 pagine)


Marchio: Hama | Categoria: Gaming controls | Dimensione: 8.36 MB |

 

Indice

Hama Combat Bow V2 Manuale Utente (16 pagine)


Marchio: Hama | Categoria: Gaming controls | Dimensione: 8.87 MB |

 

Indice

Hama Combat Bow V2 Manuale Utente (16 pagine)


Marchio: Hama | Categoria: Gaming controls | Dimensione: 8.27 MB |

 

Indice





Più prodotti e manuali per Game pad Hama

Modelli Tipo di Documento
00011219 Manuale Utente   Hama 00011219 gaming control, 30 pagine
Vendetta Manuale Utente   Hama Vendetta, 24 pagine