DMP Electronics XR500 Manuel d'utilisateur télécharger pdf (Page 14)

XR500 Series Canadian Programming Guide Digital Monitoring Products

inTroduCTion

1.13 Multiple Displays

For many programming and user options, such as Area selections, Menu Displays, and Status Lists, there

are several displays containing programming. For example, when programming Menu Displays, keypads 1

through16displayontwoseparatedisplays.First,keypads1through8display.PresstheCOMMANDkey

todisplaykeypads9through16.Thissameschemeisusedforareas1through32.

Note:Areasnotpre-programmedatinstallationtodisplayatthiskeypadcannotbeviewed.

1.14 Asterisks in Programming

Asterisks display next to a programming option that is already selected. As shown in the example, options

that are selected to display the current programming selection have an asterisk next to the number. Those

thatarenotselectedsimplydisplaythenumber.IntheDevicesexample,keypads3,8,9,and15arenot

selected.IntheAreasexample,areas3,8,9,15,19,23,25,and31arenotselected.Inbothexamples

the numbers with asterisks are selected.

*1 *2 3 *4

*5 *6 *7 8 *13 *14 15 *16

9 *10 *11 *12

Devices

*29 *30 31 *32

*13 *14 15 *16

9 *10 *11 *12

25 *26 *27 *28

*1 *2 3 *4

*5 *6 *7 8 *21 *22 23 *24

*17 *18 19 *20

Areas

To select or deselect a number, simply enter the number using the digit keys on the keypad. This same

scheme is used when viewing the panel armed status and other programming and operational functions.

RemembertopresstheCOMMANDkeytodisplaytherestofthedeviceorareanumbers.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 83 84

Pas de commentaire

DMP Electronics XR500 Manuel d'utilisateur Page 14