DMP Electronics XR500 SERIES Spécifications télécharger pdf (Page 230)

report) is sent to the central station using the account number of area 1. Enter 0 (zero) to disable this

option.

Open /Close Reports: Allows the panel to send an opening report to the receiver whenever an area

within the partition is disarmed. A closing report is also sent to the receiver when any area within the

partition is armed.

Closing Check: Select the Closing Check box to have the panel verify that all areas in this partition

have been armed after a schedule expires.

Closing Code: Select the Closing Code box to require a user code entry when arming the system at a

keypad.

Any Bypass: Allows zones to be bypassed without a code during the arming sequence. A code is

always required to use the Bypass Zones option from the User Menu on the keypad.

Area Schedules (XR100/XR500): Select the Area Schedules box to allow each area to set its own

shift schedules 1 to 4. Unchecked will provide one set of schedules for the system.

See Schedules XR500/XR100 Series.

Area Schedules (XR150/XR3590/XR550): Select the Area Schedules box to follow individual sets

of area schedules programmed in the User Menu. Unchecked for all areas to follow only one set of

schedules in the User Menu.

See Schedules XR150/XR350/XR550 Series.

Note: Area Schedules are not designed to operate with All/Perimeter or Home/Sleep/Away

systems.

Program > Zo ne Informatio n

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 335 336

Pas de commentaire

DMP Electronics XR500 SERIES Spécifications Page 230