DMP Electronics XR500 SERIES Spécifications télécharger pdf (Page 39)

100

101

System > Configure > Remote Link > Network Tab

TCP Trap

The options available are used to configure the TCP communication connection to the iCOM or iCOM-E

version 103 or higher installed in the SCS-1 or SCS-1R receiver. This allows network panels with a

dynamic IP address to be trapped for Remote Link upload/download.

TCP Trap Enabled: Check this box to enable TCP Trapping.

Programming App. Address: Enter the IP address of the Remote Link computer used to program

panels. If the Remote Link computer is behind a firewall, enter the IP address of the network router.

This address is sent to the panel iCOM or iCOM-E to use for connection to Remote Link for a remote

upload/download session.

Programming App. Port: This is the port used by the Remote Link computer to make the connection

to the panel, iCOM and iCOM-E using TCP protocol. The default value is 2002.

Trap Server Address: Enter the IP address of the SCS-101, SCS-104, iCOM or iCOM-E installed in the

SCS-1 or SCS-1R receiver. This address is used by Remote Link to send trap messages.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 335 336

Commentaires sur ces manuels

Pas de commentaire

DMP Electronics XR500 SERIES Spécifications Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité DMP Electronics XR500 SERIES